15A NCAC 02H .0139 MINIMUM DESIGN REQUIREMENTS
All facilities requiring a permit pursuant to this Section shall be designed following good engineering practice and comply with the minimum design requirements specified in Rule 2H .0219 of this Subchapter. The plans and specifications must be stamped and sealed by a Professional Engineer licensed in North Carolina unless all three of the following conditions are met:
(1) the plans and specifications are for domestic waste from a single family dwelling with flows of 1000 gallons per day or less, and
(2) the plans and specifications are prepared by the homeowner, and contain complete information needed to evaluate the proposed facility, and
(3) the effluent limitations are for secondary treatment.
History Note: Authority G.S. 143‑215.1(c)(1);
Eff. October 1, 1987.