19A NCAC 03D .0527 EXHAUST EMISSION CONTROLS TAMPERING CHECK
The authorized safety equipment exhaust emission inspection mechanic must approve or disapprove each inspected item. The following requirements as listed on the SI-15, which is the receipt and statement form, shall apply:
(1) Not applicable - This block shall be checked if the vehicle inspected was not originally equipped with the emission control devices as listed.
(2) Connected - This block shall be checked if the vehicle is equipped with the item and it is connected and in an operable condition.
(3) Disconnected - This block shall be checked if the required emission equipment has been disconnected, removed or made inoperable.
(4) Corrected - This block shall be checked if the emission equipment which was disconnected or inoperable is repaired or replaced.
History Note: Authority G.S. 20-2; 20-39; 20-183.4D; 20-183.5;
Eff. October 1, 1994.