19A NCAC 03D .0904 APPROVAL AND LABELING OF DEVICES
(a) No devices manufactured with a luminous reflectance of more than 20 percent or a light transmittance of less than 50 percent will be approved for use on vehicles registered in this State.
(b) After approval of the device by the commissioner, each manufacturer shall provide an approved label with a means for permanent and legible installation between the device and each glazing surface to which it is applied. Each label shall contain the following information:
(1) The name and address of the manufacturer;
(2) The registration number assigned to the device by the Division; and
(3) The words, "complies with G.S. 20‑127".
(c) Each manufacturer shall include instructions with the device for proper installation, including the affixing of the label specified in Paragraph (b). The label shall be placed as required by G.S. 20‑127(d).
History Note: Authority G.S. 20‑39; 20‑127;
Eff. January 1, 1988;
Amended Eff. November 1, 1988.